A good morning, but not a great night

This morning, I went over to Frank’s to see if he could help me with my rudder pedal assembly. I had an idea of how to jury rig the pedal, but I wasn’t sure how to implement it. Fortunately, Frank is a lot smarter than me when it comes to fixing things, and he has the advantage that he installed this rudder assembly originally. It took us a couple of hours of reaching around into the depths of the kayak with screwdrivers and ratchets, but it worked.

It seems to be holding, but I’m looking forward to getting the replacement parts next week – the company that made the rudder system redesigned the tracks a few years ago to make them out of aluminum instead of plastic, and they tell me I can just swap out the tracks without changing any other parts – but of course first I’ll have to undo all the great jury rigging that Frank and I did. Tim of PaddlersSupply.com and Tom of TopKayaker.net got me hooked up and they are sending me the new parts, so I should have them in time for the Rochester Open Water Challenge.

The Time Trail kind of sucked tonight. First problem was that I forgot my GPS and heart rate monitor. Dan loaned me his GPS but I still didn’t have the heart rate chest band, and he took it home afterwards so I didn’t get to download the info. It was raining, but not too cold. The wind was blowing from the south, meaning that you started into the bay with enough tail wind to make waves, but not enough to really help you go fast. I think I was making around 6.2 or 6.3 mph. Turning in the waves was the usual adventure, especially when I wasn’t too sure about the rudder, and then coming back into the wind was slow, probably around 5.8 or 5.9. My split was around 9.9 minutes, compared to 9.53 last week. Going up the creek was a little better in spite of the headwind and the increasing rain, but it was a struggle to keep the speed up over 6.1. I did the turn the “normal” (counter clockwise) way – last week Jim Mallory convinced us that doing it the other (clockwise) way is probably faster because of the geometry of the final turn before the buoy, but I wanted to avoid full right rudder tonight. The way back was faster, of course, with a good tail wind and the current, so I was seeing speeds between 6.4 and 6.8. My final time was around 19.6 (compared to 19.20 last week), so my second half was faster than the first half. Paul D was a tiny bit faster than me tonight – I think Ken said he beat me by 7/100s of a minute. Oh well, when you’re only a few hundreds of a minute faster than a guy one week, you’ve got to expect that he’s only got to make a tiny improvement or you a tiny mistake to change the order the next. I’ll get him back next week.

Should have looked at it yesterday!

Remember how on Saturday I was having to hold full right rudder just to go in a straight line? Well, today we went out for a long paddle on the lake, getting to know the course of the Rochester Open Water Challenge. The lake wasn’t bad, and I was riding Dan’s wash the whole way, but the rudder problem was getting worse and worse. Just was we were getting back towards the beach, Dan wanted everybody to go into the Bay because that’s where he’s planning to take the race, but my foot was cramping up from holding so much rudder for about 7.5 miles, so I started heading for the beach.

I was about 300 metres from the group when my rudder when “ping” and I felt the cable fall onto my right foot. Oh, that is bad. Here I am, trying to ride the surf to shore when I’ve got full left rudder on. I raised my rudder, and that’s not much better – I remember when I bought this boat finding a review on-line that said that the biggest problem with it was that it was totally uncontrollable without a rudder, and so therefore not safe for a sea kayaking trip. Well, it took a lot of dragging my paddle on one side, sweeping on the other, and then repeating the process on the other side, but I got into shore.

And when I looked, as well as the cable coming off the rudder pedal, the foot peg had completely “burst through” the channel that it’s supposed to ride in. No doubt it was this that make the rudder misbehave. Unfortunately, there is no way in hell to fix this without a replacement part, and Baycreek doesn’t carry them, so I’m not going to have this boat working for Wednesday night.

Long workout today

Today I went out with a couple of guys from the team for a paddle around Irondequoit Bay. I think they do this paddle every Saturday, but it was a very long trip for me. We ended up going 10.85 miles. My longest work out to date was 10 miles, and that time I purposely set out very slowly. This time I was trying to keep up with one of our faster paddlers, Mike, and Paul D who eats miles and never stops. Looking at my GPS info, it appears that I went a pretty steady 5.8 – 6 mph for the first 4.5 miles or so, but after that we were constantly pausing and restarting. Part of that was that around that time we were going into this “side bay” with a lot of weeds and we had to keep clearing each other’s rudders. Plus I was having some sort of problem with my rudder – I was constantly putting on full right rudder just to keep in a straight line. I wonder if one of my cables has slipped? I’m not sure how to fix that, but I suspect I can’t do it alone.

There were a lot of wakes out on the bay, and we were often getting hit by two or three at once. That added a bit of challenge, especially when my rudder was acting funny. I’m really glad I was in a group and not out there alone. None of us dumped, but if we had, there were two other kayakers near by to help. You sure wouldn’t want to count on the power boaters for help – if anything, some of them seem to be trying to swamp you.

As we crossed under the bridge, I realized we only had 2.5 miles left, but I was really fatigued. Up until this point, I’d been avoiding riding the other guy’s wakes because I wanted a full work out, but now I was just trying to get home without slowing everybody down. Paul D offered me his wake, and I took him up on it. At least until we started getting a wake from behind and we both started surfing it. After it passed, he was 10 metres off to my left, and so I tried to grab Mike’s. He’s in a surf ski, which doesn’t have much wake, and he’s a much faster paddler than me, but I tried gamely to stay on it for a while. With about half a mile to go, I just let them both go and struggled in at my own speed.

I’d like to do this again, but maybe I won’t be so shy about riding wakes, and that way I might actually have some energy left at the end.

Video from last night’s time trial

Click for movie

If you look, you can see that the blade of my paddle doesn’t go all the way into the water. I need to work on my catch. I also think I need to get my paddle more vertical. I’m dropping my head too much. My right hand isn’t opening on the forward rotation. There’s always something to work on.

On the other hand, my rotation is definitely getting better.