A tale in three screen shots.
Trying to figure out Fenix 6 “Race Activity” fields
I went out for a paddle today, and had both my Forerunner 920XT and my Fenix 6X on my foot strap, and both set up to “Race an Activity” with the same 10km activity selected. The course I was racing had 57:08.3 as the base time. I had my GoPro so I could grab some shots of both screens. I am doing this because I can’t for the life of me figure out what some of the fields are on the Fenix. I know what fields I need on the 920XT, but the equivalent fields on the Fenix are either in different places, or they show utterly insane values.
This picture is quite early on in the paddle. The 920XT is showing a Estimated Finish Time of 55:21, and Time Ahead of 0:11. So it thinks I’m going 11 seconds faster than the activity I’m racing. Since the difference between the target time of 57:08.3 and the estimated finish time of 55:31 is more than 11 seconds, I assume it means I’m 11 seconds ahead right now, but if I keep it up I’ll finish in 55:21. On the Fenix side, the Estimated Finish Time is 1:01:23. I have no idea why it thinks I’m 6 minutes slower than the 920XT. But here’s the insane part: The Time Behind is showing 42:07:48. WHERE THE FUCK IS THAT 42 HOURS COMING FROM!!! Even if the 42 represents something other than hours, if the time behind is 7:42, I’m trying to figure out what that mathematically relates to, because the estimated finish time is only 4:14 behind the goal time, not 7:42.
Another screen shot around the same time. The top one is labelled “ETE”, I think that’s time remaining. The middle one is distance remaining (9.49 km, so about 500 meters into the “race”). I’m not sure, but I think the bottom one is actually an estimate of the clock time when I’m expected to finish.
This is further along. I assume the prominent number in the middle is the estimated total time? The top one is distance remaining (5.47 km). That syncs up nicely with the 920XT saying I’ve completed 4.53 km.
This is seconds after the previous one. The Fenix is showing an utterly useless map. If there’s a way to zoom this in so it would be more useful, I haven’t discovered it.
And a few seconds later. The Fenix is showing the same distance remaining, although this time in the prominent middle position. The top field is, as I mentioned in the second screen shot, apparently the estimated time to completion. The bottom one is the estimated clock time at completion. No idea why I’d want to know that.
Here’s that baffling “Time Behind” again, still with the strange “42”. The estimated finish time at the bottom of 59:20 lines up OK with the 58:12 earlier in this second set of pictures because I had to stop paddling to take these so I’m getting slower with each shot. But again, even ignoring the “42” in the top field doesn’t make sense, because again, 59:20 is 2:11 slower than the goal time, not 6:39.
I wish there was some documentation on what these fields were, and I wish there was a way to customize them.
Disappointed once again
Early this year (or possibly, it’s hard to tell the flow of time, but it was “pre-COVID”), I saw a new 360 degree camera called the Insta360 ONE R. I was really interested because I’ve been thinking that a 360 degree camera might be better for my kayak videos that the split screen that I currently use (at least, what I use in the rare occasions when both cameras work). I could either publish as a 360 video or crop it to a flat but looking at what might be interesting right now (like the kayaker sneaking up behind me or the C-2 I’m about to take a rest behind).
And there are three reasons why I started thinking about this now with this camera when I hadn’t with previous 360 degree cameras:
- I’ve heard horror stories about how long it takes to stitch the video together with the GoPro Fusion and GoPro Max – like possibly more than 2-3 days for one of my 2 hour race videos. The ONE R supposedly does the stitching in the camera with “no waiting”
- The ONE R is modular, so if you decide 360 is a gimmick and you don’t want to do it any more, you can pull out the 360 module and plug in the 4k module and use it just like a Hero 7.
- There were no extended batteries for any 360 camera, just a lot of suggestions to buy multiple batteries and swapping them out, which isn’t an option in a kayak race.
For various reasons, GoPro has always seemed to target about a 70-80 minute battery life. And GoPro’s support page freely admits that they don’t care that the GoPro Hero 7 and Hero 8 will overheat and shut down long before you hit the 70 minutes if you’re trying to use the full advertised resolution and frame rate on a summer day. I get it, I guess, their target market are guys with RedBull sponsorships shooting 5-10 minute ski or surf or mountain bike runs, not me.
The ONE R listed a similar battery life (of course, no indication of whether they have a similar overheating problem), but they also listed a “boosted battery base” as an option that was coming soon. The “boosted battery base” would double the number of milliAmp-hours, theoretically giving you twice the battery life. But it wasn’t out, so I just bided my time.
Well, the Boosted Battery Base is now out. And to my massive disappointment, they have the following warning on the order page:
ONE R is not waterproof or designed for extreme action shooting when assembled with the Boosted Battery Base.https://store.insta360.com/product/one_r_battery
I kind of don’t want to buy $500 for a camera if it’s going to be ruined if I tip over. That doesn’t often happen in a flat water race, but I have been pretty soaked by rain. And once would be enough.
More Fenix 6X problems
When last I spoke about the 6X, I mentioned that they’d updated the firmware which vaulted the GPS performance from “utterly crap, I’d rather use a sextant” to “acceptable, but not as good as the 920XT”. Nothing has changed on that front. But I want to mention a few other things:
- I tried to use the “Race a previous activity” feature. On the 920Xt, this works pretty well. It shows your expected finish time, as well as how many minutes and seconds before or after that is compared to the activity you’re racing. Very useful for virtually racing yourself. I’ve tried it twice now on the Fenix, and I can’t make head nor tails on it. I’m a little handicapped that I don’t have my reading glasses in the boat, so I can’t read the field labels, but I thought I’d be able to logic them out. The field that I think should be should show the minutes and seconds faster or slower than the target starts off showing a time just a bit more than 2 hours (on a 1:33 activity). It still shows a time a bit more than 2 hours when it suddenly changes from white (meaning you’re that far ahead of the activity) to black (meaning you’re that far behind the activity). It also shows another field that shows your estimated time to completion and another showing distance remaining (which is handy). But without a usable time ahead/behind, I don’t really get information on whether I’m pacing it well, which is what I really want. So today when I did my regular “COVID Bassett” virtual Armond Bassett race, I had my Fenix showing the usual time/distance/heart rate/speed fields, and my 920XT showing the virtual race fields. I’m going to try using both and capturing it on video so maybe I can figure out what’s going wrong, and maybe show it to Garmin.
2. Garmin VIRB Edit, the software than I use for putting overlays on my videos doesn’t automatically pick up activities from my Fenix when it’s plugged into the computer the way it did with all my previous Forerunners (actually, I’m not sure if it did with the Forerunner 305, but definitely with the 310XT, the 910Xt and the 920XT). Instead I have to download the FIT file from Garmin Connect and upload it manually to Garmin VIRB Edit, which is annoying.
3. The Fenix 6 is utterly, 100% completely crap at reconnecting to the phone after they’ve been apart for any length of time. I charge my phone overnight in my office, but don’t take off the watch. In the morning, the 920XT would reconnect 99.9% of the time without any sort of intervention on my part. Just about every day, I will suddenly realize I’m not getting any notifications on my watch and go into the bluetooth menu on the phone to reconnect the Fenix. Today it disconnected while both the watch and the phone were on my surfski, less than 2 feet apart. My activity uploaded to Garmin Connect when I manually reconnected them afterwards, but for some reason it didn’t go to Strava. With the 920Xt, I was used to getting three notifications while I’m carrying my boat back to the car from the water – first one telling me the activity is on Garmin Connect, second one telling me it is on Strava, and third one telling me it is on Relive. I get that with the Fenix 6 more often than not, but certainly not with the certainty I would get it when using the 920XT. I may have to record a video to demonstrate how bad this is, since as I was writing this I realized my phone was in the other room, and when I went to pick it up it didn’t automatically reconnect to my Fenix.
It is hard to explain just what an amazing feeling it is to start paddling away off on a long easy paddle. More than the thrill and challenge of a race or the good feeling of accomplishing a hard workout, just the feeling of strength and power and accomplishment, it is what keeps me going out day after day. It’s a very zen state when your technique is good and the boat is moving effortlessly.
You know, there were a few times in my skiing and orienteering lives where I was in a state where everything was coming together effortlessly and it seemed like I was just a sponge for sensations. I’ve heard it described as “flow state”.
I can think of very specific days when it happened, like an orienteering meet at Hilton Falls where I felt like I barely had to look at my map, I just knew where I was and where I had to go. Frank Farfan was taking pictures at one of the controls and he said I was the only one who ran straight in and straight out of that control without a moments hesitation and the whole race was like that. I believe the picture he took of me ended up in the International Orienteering Federation newsletter.
Another time was on the second day of one of the Canadian Ski Marathons I did. It was a gorgeous day and I remember double poling down a gentle incline and passing a guy who said “Il fait beau, eh?” and that just summed up the entire day for me. Perfect skis, perfect wax, perfect snow, perfect day and a real feeling of being one with everything.
I was watching some YouTube videos the other day from a guy who had a v12 surfski with hatches and bulkheads that he was using for kayak tripping. I’d be damn tempted to go travel the waterways of Algonquin Park again like I did 40 years ago if I had hatches and bulkheads in my V8 Pro. They probably have sleeping pads that don’t hurt by now.