Category: Revelation

Ok, that’s better

I had an appointment with my physiotherapist today. She’s pretty pleased with the progress on my wrist – I’m getting more range of motion back every day, and my grip strength is increasing as well.

I got my KVM switch working again, by unplugging the monitor cable from it and plugging it back again. Not sure if that’s a KVM problem or a monitor problem – next time I’ll try power cycling the monitor instead.

And the network connector arrived for the upstairs TiVo. That means I can do a daily call using the network, instead of the phone. That’s not a huge win, although there wasn’t a convenient phone jack near the TiVo and formerly I’d been using this device that puts the telephone signal through the power lines. But far more importantly, this enables multi-room viewing. I just tried it, and it works ok, but not great. On one Tivo, you can browse the “Now Playing List” (ie the list of recorded programs) from the other TiVo. You can choose a show and “transfer it”. It doesn’t quite transfer in real time, so you have to wait a bit before you start watching, although you can go back to the menu and watch something else, or even choose more shows to transfer, while it’s transferring. And when it’s done transferring, it’s on both TiVos.

If I had any wishes, I’d want the transfer to happen fast enough that instead of transferring, you could watch it directly from the other machine’s hard drive, and therefore when you finished, you could delete it or otherwise manage it on the originating TiVo’s drive. Oh well.

TiVo Phase 2

Came home and the TiVo had finished updating. I entered all the Season’s Passes from the other TiVo – or at least the ones I could: you can’t enter normal Season’s Passes (SPs) for shows that aren’t currently on the schedule, and many of our old SPs are no longer valid. But there were a few surprises – I couldn’t find either “Red Green” or “As Time Goes By” on the schedule, even though we recorded both of them a few days ago.

After I entered the Season’s Passes, I switched the cable input from the old TiVo to the new one, and the coax RF cable from the new TiVo goes into the RF modulator. It’s already recorded a show. Woo hoo!

Phase 3 will be when the new USB wireless network dongle I ordered from TiVo arrives, and I can start sharing TiVo shows between the two TiVos. I can hardly wait.

Getting my TiVo on

A few weeks ago, I bought a used Series 2 TiVo to replace the bedroom Series 1. The main impetus for this is to use the ability to watch programs recorded on the TiVo in one room on the TiVo in another room.

By coincidence, I also happened to have a 180Gb hard drive sitting on my shelf which I thought would be a good addition to the new TiVo. Unfortunately the Series 2 TiVos don’t have a second bracket, power connector, and ide connector so for simplicity I thought I’d replace the existing drive with the big one.

Unfortunately in order to do the drive replacement, you need a WinTel box that you can boot with a special Linux boot CD with mfstools 2.0 on it. I had the CD, but unfortunately until a few days ago my Windows box was out to lunch. Dropping an older and less capable video card brought the Windows box back, so it was time to get this thing done.

I stuck the 180Gb drive in the Windows box and booted it with the Ultimate Boot CD and tested the hell out of it using IBM’s DFT and Western Digital’s drive testers, and it passed everything. That’s a good start, because the reason it was on the shelf is that the Linux 2.6 kernel didn’t like something about the way it was partitioned (it was fine in 2.4).

Then I put the 40Gb drive from the TiVo in the Windows box and copied the image to the 180Gb drive using the mfstools. I put the 180Gb drive into the TiVo and confidently screwed the cover on, and tried to boot it.

Oh. Bad news. I don’t see anything. Dammit! I unscrew everything and put the original 40Gb disk back in the TiVo. And I don’t see anything! Panic time. Is there any chance that I mixed up the “from” and “to” in the copy? I don’t think so. But what else can it be? I conclude that the TiVo image on both drives are now screwed up.

After some frantic Googling, I find ptvupgrade.com has a “InstantCake” CD, which for $20 gives me a iso image that I can burn onto a CD, boot my WinTel box, and it will install a TiVo image on the hard disk with no sweat. Ok, $20 for a bit of instant gratification seems like an ok deal. I do it, slap it back in the drive (but this time nothing is screwed down) and find that I’m still not getting anything on the screen. But just for the hell of it, instead of plugging the RF-out of the TiVo directly into the coax going to the TV, I plug the composite-out of the TiVo into the RF modulator that the DVD normally plugs into. And lo and behold, I’ve got a signal. Makes me wonder if the original copy wouldn’t have worked. Also makes me think that the RF modulator is screwed.

So I do the guided setup and while it’s doing its first “daily call”, I screw the drive back to the drive bracket and put the top back on. And activate the service on-line. The daily call is taking forever, so I go to bed.

I woke up this morning to find that the daily call had completed, but evidently before the TiVo service had gotten the word that I’d activated the service. So it was upgraded from the software version 5.x which was on the InstantCake ISO to 7.2.x, it was still showing it as having no service, and still named “Family Room” (which I presume was the previous owner’s name for it). So I did another daily call, and before I left for work it was showing that now had an account in good standing, and it was named “Bedroom2” like it was supposed to. But still no shows in the guide.

I’m hoping that when I get home tonight the guide will be updated and indexed so I can start the tedious process of entering all the Seasons Passes that were in the other TiVo.

BTW: If you ever need a money making idea, come up with a way to take Season’s Passes and thumbs and shows from your Series 1 TiVo and put them on your new Series 2 TiVo.

Update: I forgot to mention that at one point during the proceedings, I tried using the RF cable with the gold plated connectors that came with the TiVo instead of the crappy one that came with the TV, and suddenly the RF modulator works well too.

That was relatively painless.

My Belkin router has needed rebooting twice in the last two weeks in order to restore wireless connectivity. I’ve experienced this before – I’ve had 4 or 5 routers before, and every one of them (except both Linksys, which were dead as soon as I got them) has, after a year or so, gotten to the point where it needs frequent rebooting. The rebooting gets more and more frequent, until eventually I give up and replace the damn thing.

For some strange reason, I decided to give Linksys another chance, but this time I decided to pay a few extra bucks and buy it from the local Staples. That way, if and when it craps out, I can take it back. Providing it behaves like every other Linksys I’ve bought, and is noticably faulty in the first 14 days.

I plugged it in, and set it up as a copy of the existing one. Even copied the MAC address. Unplugged the existing one, plugged this in, rebooted both the router and the cable modem, and the new router got the same IP as the old one had (thank goodness) and everything seemed to be working exactly the same. I’m keeping my fingers crossed.